P 97 sunshade for outdoors with pre-painted aluminium slats per m2, salt spray resistant for 800 hours, in RAL colours as per product data sheet, 0.75 mm thick, 97 mm wide with longitudinal stiffening ribs on both sides, anti-noise and blackout seal inserted in the lower inner rib; the slats are fitted at both ends with stainless steel clips for snap connection to the slat-holder pivots.
85×45 mm self-supporting extruded aluminium side rails painted in RAL colours. Friction-driven rocker drive mechanisms in untreated zamak with 37° slat positioning during descent, automatic slat closure when the sunshade is lowered, and horizontal positioning during ascent.
Ascent and descent movement by means of a carbon steel chain with articulated components.
Automatic safety release system in the event of obstacles during descent.
Galvanized die-cast pivots connected by stainless steel hinges with constant pitch.
The sunshade has an anti-lifting system for the slats from the outside in both closed and open positions.
A U-shaped galvanized steel box houses the electric motor and transmission shafts.
Control by asynchronous single-phase 230V-50HZ IP54 electric motor with thermal protection, electromagnetic brake, automatic limit switch unit with upper and lower stop, equipped with 0.50 ml of 4×0.75 four-pole cable and wired female connector (excluding push-button panel).
Including rail mounting kit, screws with plugs and compensating shims for out-of-lead.
Scheda prodotto e Gamma colori 
